This is a magnificent and very large antique Regency English Old Sheffield silver plated tray, circa 1820 in date.
This Old Sheffield tray is of rectangular shape and features a deep-set border which is richly decorated with exquisite scalloped shells, acanthus leaves and c scrolls, typical of the Regency period.
The tray has two elegant and large handles, one to each end, with matching acanthus leaves and c scrolls decoration.
The body of the tray is finely chased with floral and foliate decoration against a textured background.
The centre of the tray has a family crest and the Latin motto: ‘Cavendo Tutus’ which translates as “Look before you leap”. This motto belonged to Chatsworth House, the home of the Duke of Devonshire.
The beauty, quality and craftsmanship of this tray, make it truly second to none.
In excellent condition with no dings, dents or signs of repair and only minor signs of wear commensurate with age and use. Please see photos for confirmation.
Dimensions in cm:
Height 5 x Width 72 x Depth 49
Dimensions in inches:
Height 2.0 x Width 28.3 x Depth 19.3
Old Sheffield Plate – or ‘fused plate’ as it is sometimes known, was the first commercially viable method of plating metal.
The material was accidentally invented by Thomas Boulsover, of Sheffield’s Cutlers Company, in 1743. While trying to repair the handle of a customer’s decorative knife, he heated it too much and the silver started to melt. When he examined the damaged handle, he noticed that the silver and copper had fused together very strongly. Experiments showed that the two metals behaved as one when he tried to reshape them, even though he could clearly see two different layers.
Boulsover set up in business, funded by Strelley Pegge of Beauchief, and carried out further experiments in which he put a thin sheet of silver on a thick ingot of copper and heated the two together to fuse them. When the composite block was hammered or rolled to make it thinner, the two metals were reduced in thickness at similar rates. Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath. When this new material was used to make buttons, they looked and behaved like silver buttons but were a fraction of the cost.
The technique Boulsover developed was to sandwich an ingot of copper between two plates of silver, tightly bind it with wire, heat it in a furnace and then mill it out in to sheet, from which objects could be made.
Our reference: 09472